Product ID:FYNAL POWDER 609002
MSDS Date:12/08/1986
FSC:NIIN:Submitter:F BT
Status Code:A
MSDS Number: CLRYV

Emergency Phone: 302-422-4511

Info Phone: (302) 422-4511

Cage: 56820

Telephone: (302) 422-4511

Cage: 56820

ZINC OXIDE (ZNO)

CAS: 1314-13-2

RTECS: ZH4810000

ACGIH TLV: 5 MG/M3

Health Hazards Acute and Chronic:IT IS NOT KNOWN TO CAUSE SIGNIFICANT
HEALTH PROBLEMS. IT IS CONSIDERED AN INERT OR NUISANCE DUST.
AVOID INHALATION OF DUST. KEEP DUST OUT OF EYES TO PREVENT
POSSIBLE IRRITATION. TLV FOR MONOMERIC MMA 100 PPM.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH WATER FOR
5 MINUTES, INCLUDING UNDER EYELIDS. SKIN: WASH WITH SOAP AND
WATER. INGESTION: RINSE MOUTH WITH WATER. IN ALL CASES, SEEK
IMMEDIATE MEDI CAL ATTENTION!

Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, HALON-FOR THE
POLYMER.
Fire Fighting Procedures:AVOID EXTINGUISHING METHODS WHICH MAY GENERATE
DUST CLOUDS. WATER STREAM CAN DISPERSE DUST IN AIR PRODUCING A
FIRE HAZARD AND POSSIBLE EXPLOSION HAZARD IF EXPOSED TO IGNITION
SOURCE.
Unusual Fire/Explosion Hazard:POLYMER DUST IS COMBUSTIBLE. THE
EXPLOSIVE LIMITS OF THE POLYMER PARTICLES SUSPENDED IN AIR ARE
APPROXIMATELY THOSE OF COAL DUST. FIRE FIGHTERS SHOULD WEAR
SELF-CONTAINED BREATHING APPARATUS.

Spill Release Procedures:AS WITH ANY NUISANCE DUST, AVOID EXCESSIVE
DUSTING. SWEEP UP TO AVOID SLIPPING HAZARD. KEEP AIRBORNE
PARTICULATE AT A MINIMUM WHEN CLEANING UP SPILLS.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
CONTAINER CLOSED TO PREVENT WATER ABSORPTION AND CONTAMINATION.
Other Precautions:OBSERVE NORMAL WAREHOUSING PROCEDURES. STORE AWAY
FROM FOODSTUFFS AND BEVERAGES.

Respiratory Protection:U.S. BUREAU OF MINES APPROVED RESPIRATOR.
Ventilation:LOCAL-RECOMMENDED
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health

Spec Gravity:5.7
Solubility in Water:NOT SOLUBLE
Appearance and Odor:WHITISH POWDER WITH FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT ABOVE 300 C.
Hazardous Decomposition Products:FROM THE POLYMER-METHYLMETHACRYLATE
AND CARBON MONOXIDE.
Conditions to Avoid Polymerization:HEAT ABOVE 300 C.

Waste Disposal Methods:DISPOSE OF IN A CLOSED CONTAINER OR HEAVY BAG
ACCORDING TO LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

SARA Title III Information:SARA TITLE III: SECTION 311/312 HAZARD
COMMUNICATION STANDARD: IMMEDIATE HEALTH HAZARD.
Federal Regulatory Information:ON TSCA INVENTORY. THIS MATERIAL SAFETY
DATA SHEET HAS BEEN PREPARED IN COMPLIANCE W/THE FEDERAL OSHA
HAZARD COMMUNICATION STANDARD 29 CFR 1910.1200. THIS PRODUCT IS
CONSIDERED TO BE A HAZARDOUS CHEMI CAL UNDER THAT STANDARD.